• Enerpac aluminum and steel lifting jacks have a capacity of 7 to 150 tons
• All-directional operation on 7, 15 and 35 ton JHA-series
• Internal relief valve to prevent overloading
• Machined flat front and bottom surfaces permit flush alignment in tight corners
• Chrome plated plungers
• Pumping handle included
• Automatic by-pass port to prevent over-extension (JH-series).

• Previous
• Next

Tabs

Chart ( metrics )

Jack Capacity		Stroke	Model Number*	Collapsed Height	Bottom Plate Dimensions W x L	Weight
ton	kN	mm		mm	mm	kg
7	62	76	JHA-73	133	73 x 158	5,0
15	133	153	JHA-156	247	92 x 238	13,2
35	311	155	JHA-356	257	117 x 254	18,1
75	667	153	JHA-756	285	174 x 325	42,6
150	1335	155	JHA-1506	327	241 x 407	95,3
30	267	155	JH-306	254	95 x 242	26,8
50	445	154	JH-506	260	127 x 258	40,8
100	890	153	JH-1006	287	181 x 328	74,4

Chart ( Imperial )

Jack Capacity		Stroke	Model Number*	Collapsed Height	Bottom Plate Dimensions W x L	Weight
(ton)	(kN)	(in)		(in)	(in)	(lbs)
7	62	3.00	JHA-73	5.25	2.88x6.25	11
15	133	6.06	JHA-156	9.75	3.63x9.38	29
35	311	6.13	JHA-356	10.13	4.63x10.00	40
75	667	6.06	JHA-756	11.25	6.88x12.81	94
150	1335	6.13	JHA-1506	12.88	9.50x16.06	210
30	267	6.13	JH-306	10.00	3.75x9.56	59
50	445	6.09	JH-506	10.25	5.00x10.19	90
100	890	6.06	JH-1006	11.31	7.13x12.94	184